Motor controller unit (MCU) main control board FCT test equipment

Motor controller unit (MCU) main control board FCT test equipment

FCT1000 mainly consists of test cabinet, test fixture and test bench.
Main test functions:
1. Spin test
2. High-low side drive test
3. Power supply voltage test
4. CAN communication test
5. Sensor power output test
6. Pedal signal input test
7. IGBT temperature test
8. Input test of "UVW three-phase current circuit" for open circuit and overcurrent comparison circuit
9. Bus voltage test
10. PWM output waveform test
11. Drive board power supply output test

Motor Driver (IGBT Driver) FCT test equipment

Motor Driver (IGBT Driver) FCT test equipment

FCT2000 mainly consists of test cabinet, test fixture and test bench.
Main test functions:
1. Static and working current test
2. Upper and lower tube MOS drive signal test
3. UVW upper and lower tube power supply voltage test
4. UVW error signal test
5. UVW three-phase error signal test
6. PWM signal delay consistency test
7. IGBT temperature test
8. UVW driver chip drive signal test
9. Bus voltage test
10. Phase voltage sampling test
11. line voltage zero-cross test

IGBT double pulse test equipment

IGBT double pulse test equipment

DP1000 mainly consists of test cabinet and test chamber.
Main test functions:
1. Test IGBT switch waveform
2. Verify the IGBT safe workspace
3. Verify diode safe workspace
4. Optimize IGBT driver design
5. Verify short circuit protection
6. Different IGBT parameters were compared
7. Test switch loss, switch resistance, switch time, diode reverse recovery characteristics, stray inductance, parasitic parameters of drive circuit, etc.

Small motor controller (BLDCM controller) FCT test equipment

Small motor controller (BLDCM controller) FCT test equipment

The FCT100 mainly consists of test cabinet and test fixture.
Main test functions:
1. Impedance test
2. Power supply voltage test
3. PWM frequency test
4. EMMC burn in
5. Offline burn in
6. 4-channel parallel test

Vehicle controller unit (VCU) EOL test equipment

Vehicle controller unit (VCU) EOL test equipment

FCT3000 mainly consists of test cabinet and test fixture.
Main test functions:
1. Static and working current test
2. CAN communication test
3. KL30 and power wake up test
4. High and low effective digital signal input threshold test
5. PWM input signal threshold test
6. Gear signal test
7. High-low side drive test
8. VBU memory module EEPROM test
9. VBU real-time clock module test
10. VBU internal power supply test
11. Sensor input pin test

12
跳转
Contact information
Address:No.8 Qingqiu Lane, SIP,Suzhou , China
Telephone:(86)512 8816 8816
Sales Tel:(86)512 8816 8816-8001
Website:https://www.hyc.cn
Email:info@hyc.cn
Sales mailbox:customer@hyc.cn
官方公众号

HYC Wechat

©Copyright 2019 Suzhou HYC Technology CO., LTD All Rights Reserved 苏ICP备13052341号-1